Chips Chipalkatti/Research and writing

Research and writing

Papers, a dissertation, a book chapter, trade writing and signed contributions, 1986 to 2017.

Selected work

Four pieces that mark the arc from materials science to the business of light.

clampfiber under load

Plate I 1987

Development of the vibrational time-delay technique and the study of stress/strain coupled diffusion in polymers

Conventional diffusion measurements lacked the sensitivity and range to show how stress changes the way polymers take up moisture. This paper introduces an instrument that tracks the mass of a fiber or ribbon from its vibration while the sample stays under controlled stress or strain, demonstrated on polycarbonate, polyimide, epoxy and Kevlar.

Review of Scientific Instruments 58(1), 112–116

sourcereflector section

Plate II 1991

Thermomechanical Analysis for the Investigation Solvent Induced and Residual Stresses in an Injection Molded Automotive Headlamp Reflector

Internal stresses in injection-molded polycarbonate headlamp reflectors cause failures in manufacturing and testing. The paper maps residual stress and strain in a reflector with a thermomechanical method, shows that solvent-based coatings create microdamage that can start cracks, and offers the method as a diagnostic for long-term reliability.

SAE Technical Paper 910283, International Congress & Exposition

BGYR400 nm700 nm

Plate III 2011

Preliminary Assessment Concerning the Practical Implementation and Visual Perception of Color Rendering Modulation for Augmented Energy Savings

Empty rooms are usually lit at full color quality. The authors propose a four-color tunable LED system that lowers color rendering when a space is unoccupied, moving spectral energy toward the yellow-green where the eye is most sensitive while holding light level and color temperature constant. Most test subjects did not notice the change.

Journal of Light & Visual Environment 35(3), 255–266

MakeUseReturnRemake

Plate IV 2015

SSL Systems: Opportunity for Sustainability Beyond Energy Savings

The energy embodied in millions of light fixtures is lost when they are discarded or even recycled. The deck proposes remanufacturing failed or outdated units with upgrades built in, borrowing from the appliance industry, and calls for a pilot with public institutions.

U.S. DOE Solid-State Lighting Technology Development Workshop, Portland, November 2015

Drawings are schematics made for this page, not figures from the papers.

Full list

Every entry opens a page with its citation, summary and links.

  1. 1986

    Stress-Coupled Diffusion in Polymer Fibers and Ribbons

    Makarand H. Chipalkatti, Richard J. Farris, Julio M. Ottino. AIChE National Meeting, Boston, August 1986.

    Conference presentation · Source

  2. 1986

    History Dependence of Stress Coupled Transport in Polymer Fibers and Ribbons

    Makarand H. Chipalkatti, Richard J. Farris, Julio M. Ottino. Abstracts of Papers of the American Chemical Society, 192nd meeting, abstract 182.

    Conference abstract · Source

  3. 1987

    Development of the vibrational time-delay technique and the study of stress/strain coupled diffusion in polymers

    Makarand H. Chipalkatti, Richard J. Farris, John M. Hutchinson. Review of Scientific Instruments 58(1), 112–116.

    Conventional diffusion measurements lacked the sensitivity and range to show how stress changes the way polymers take up moisture. This paper introduces an instrument that tracks the mass of a fiber or ribbon from its vibration while the sample stays under controlled stress or strain, demonstrated on polycarbonate, polyimide, epoxy and Kevlar.

    Journal article · doi:10.1063/1.1139551 · Source

  4. 1989

    Stress and deformation coupled moisture transport in polymers

    Makarand H. Chipalkatti. University of Massachusetts Amherst, Ph.D. dissertation.

    Doctoral dissertation · doi:10.7275/pbmj-e441 · Source

  5. 1991

    Thermomechanical Analysis for the Investigation Solvent Induced and Residual Stresses in an Injection Molded Automotive Headlamp Reflector

    Makarand H. Chipalkatti. SAE Technical Paper 910283, International Congress & Exposition.

    Internal stresses in injection-molded polycarbonate headlamp reflectors cause failures in manufacturing and testing. The paper maps residual stress and strain in a reflector with a thermomechanical method, shows that solvent-based coatings create microdamage that can start cracks, and offers the method as a diagnostic for long-term reliability.

    Technical paper · doi:10.4271/910283 · Source

  6. 1993

    Investigation of Polycarbonate Degradation by Fluorescence Spectroscopy and Its Impact on Final Performance

    Makarand H. Chipalkatti, Joseph J. Laski. Structure-Property Relations in Polymers: Spectroscopy and Performance, Advances in Chemistry 236, ch. 25, 623–642, American Chemical Society.

    Follows the degradation of polycarbonate through the fluorescence of its known breakdown products, and connects what the spectra show to how the finished part performs.

    Book chapter · doi:10.1021/ba-1993-0236.ch025 · Source

  7. 1995

    Discoloration of Polycarbonate and Other Transparent Polymers under Combined Thermal and Ultraviolet Conditions: A Phenomenological Study

    Joseph J. Laski, Makarand H. Chipalkatti. ANTEC 95, Society of Plastics Engineers, 3260–3264.

    Conference proceedings · Source

  8. 2002

    A New Illumination Paradigm I

    Makarand Chipalkatti. National Research Council, Partnership for Solid-State Lighting: Report of a Workshop. Presented 26 March 2001.

    Argues that solid-state lighting will expand the lighting industry instead of only replacing older lamps, citing efficiency, long life, durability and tunable color. Names the obstacles as public unfamiliarity, perceived cost and the lack of simple universal standards, and calls for an industry, academic and government partnership.

    Workshop presentation, published synopsis · Source

  9. 2003

    LED Lighting System

    Hide Warashina, Makarand (Chips) Chipalkatti. Journal of the Illuminating Engineering Institute of Japan 87, Appendix, 229–230; 2003 annual conference session S3.

    Conference contribution · doi:10.2150/jieij1980.87.Appendix_229 · Source

  10. 2004

    Follow the Leader

    Keith Scott, Nadarajah Narendran, Ron Harwood, Makarand (Chips) Chipalkatti, Chris Bohler. Lighting Design + Application 34(6), 49–54.

    Expert panel feature · doi:10.1177/036063250403400613 · Source

  11. 2008

    How Do You Define Innovation and Make It Practical and Saleable to Senior Management?

    Makarand Chipalkatti. InnovationManagement.se, 7 January 2008.

    Defines innovation as an idea put to work in the market that produces new profit and growth, and that is new in kind, not a refinement. Recommends a financial and strategic case, a determined leader, measures of top-line growth, and tolerance for risk and failure.

    Signed roundtable contribution · Source

  12. 2008

    How do you Source and Manage Ideas to Come up with the Best Innovation Opportunities for Your Company?

    Makarand Chipalkatti. The Innovator 1(2) and InnovationManagement.se, January 2008.

    Recommends gathering ideas through many channels, with key customers treated as partners, then narrowing quickly to a small screened set, letting related ideas merge, and putting the most persistent through full financial and strategic analysis.

    Signed roundtable contribution · Source

  13. 2008

    What are the Most Effective Approaches to Drive an Innovation Pipeline?

    Makarand Chipalkatti. InnovationManagement.se and The Innovator, 29 May 2008.

    Makes the case for a company-wide idea platform, because team-level channels screen out ideas that reach beyond one group. The technology is the easy part: success depends on fair, open reviews, a prompt answer to every submitter, and leaders willing to act.

    Signed roundtable contribution · Source

  14. 2008

    How do you Build and Sustain a Culture and Climate for Innovation and Entrepreneurship?

    Makarand Chipalkatti. InnovationManagement.se and The Innovator, 19 August 2008.

    In a mature organization an entrepreneurial culture can only come from the top, through leaders who set the example, repeat it and change the rewards to match. Innovation managers need patience and discipline, and people who take personal risks should be rewarded for it.

    Signed roundtable contribution · Source

  15. 2010

    Investigation of Visual Perception under Dynamic Color Rendering Modulation for Augmented Energy Savings

    Maria Thompson, Joseph Laski, Makarand Chipalkatti. Proceedings of LS12-WhiteLED3, Eindhoven, 81–82.

    Conference paper · Source

  16. 2010

    Use LEDs To Build The Next Solid-State Lighting Ecosystem

    Makarand Chipalkatti. Electronic Design, 28 December 2010.

    Trade article · Source

  17. 2011

    Preliminary Assessment Concerning the Practical Implementation and Visual Perception of Color Rendering Modulation for Augmented Energy Savings

    Maria Thompson, Joseph Laski, Makarand Chipalkatti. Journal of Light & Visual Environment 35(3), 255–266.

    Empty rooms are usually lit at full color quality. The authors propose a four-color tunable LED system that lowers color rendering when a space is unoccupied, moving spectral energy toward the yellow-green where the eye is most sensitive while holding light level and color temperature constant. Most test subjects did not notice the change.

    Journal article · doi:10.2150/jlve.35.255 · Source

  18. 2015

    LEDs and Solid State Lighting Ecosystem

    Makarand (Chips) Chipalkatti. Surface Mount Technology Association, On-Demand Webinars 8(1), 8 July 2015.

    Webinar · doi:10.37665/wezsuzb46613 · Source

  19. 2015

    SSL Systems: Opportunity for Sustainability Beyond Energy Savings

    Chips Chipalkatti. U.S. DOE Solid-State Lighting Technology Development Workshop, Portland, November 2015.

    The energy embodied in millions of light fixtures is lost when they are discarded or even recycled. The deck proposes remanufacturing failed or outdated units with upgrades built in, borrowing from the appliance industry, and calls for a pilot with public institutions.

    Workshop slides · Source

  20. 2017

    The Solid State Lighting Ecosystem is ready for launch in India!

    Dr. Chips. Dr. Chips Consulting, 22 February 2017.

    Essay

  21. 2017

    Design Thinking in Practice: interventions for product improvement

    Dr. Chips. Dr. Chips Consulting, 15 June 2017.

    Essay

Bring him into the room.

For keynotes, panels, executive workshops, and board or advisory conversations. Corrections and additions to the record on this page are welcome.

Send an enquiry